• Pump should only be used with light weight & non-flammable liquids
• Water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids, and other liquids compatible with pump materials of construction
   

• DISCHARGE                                     21 LPM / 7 GPM
• BUNG                                               2" FOR USE WITH DRUMS
• FITS                                                  205 LTR / 5 GAL DRUMS
• DISCHARGE HOSE LENGTH           47.70" (1212 mm)
• WETTED COMPONENTS                 Polyethylene & PVC

CODE NO                       SHP/3

ORDER NUMBER           44402

• Pump does not require any assembly. However, if necessary, cut suction tube at an angle to fit your supply container

• Insert the Suction tube into the opening on the drum from which media is to be pumped & screw down the Bung Adapter (Type B & C)
•  Position the discharge hose into the receiving container. For Siphoning/ Automatic transfer, be sure that the level of media in the supply container is higher that of the receiving container
• Make sure that the Air Vent cap is in the fully closed position
• Grasp pump handle & pump up & down (Type B & C) or Squeeze Bulb (Type A) repeatedly. When discharge hose is completely full, you may cease pumping /squeezing to allow siphoning action
• Pump will continue to dispense media & will slow the discharge action once the level in the supply container lowers & that in the receiving container rises. Once the level equals, Siphon action will stop
• Pumping can still be continued by repeated up & down movement of the handle (Type B & C) / Squeezing of the Bulb (Type A)
•  To stop Siphon flow at any time, unscrew Air Vent Cap. To restart siphoning action, once again screw the air vent cap & follow step 4 above