HP 80(High Performance) spray guns are easier to use than most spray guns. These lightweight gravity feed spray guns are suitable for production work on articles of medium or large sizes. They are ideal for spray-painting motorcar bodies, refrigerators, machinery, etc. Perfect balance, comfortable handle and trigger action makes them easy and non-tiring to operate. Aknob on the left can easily control round to fan spray of pattern.
These gravity feed spray guns are supplied with a 0.75 lit. gravity cup

SPRAY GUN P80

Name: SPRAY GUN P80
SKU: P80

SKU: P80

AED150.00

Quantity

High Speed production

Lightweight & sleek

Symmetric gravity cup

Superior Air Cap technology

Spray-jet variable from round concentrated to wide fan pattern
Automobiles

Furniture

Industries

Textile

Sports
Code No. P80

Cup capacity (litres) 0.75

Gun distance from work piece mm(inch) 228.6(9)

Fluid nozzle orifice dia. (mm) 1.7

Required pressure (kgs/sq.cm) 2.5-5

Air consumption of rated pressure lit/min(c.f.m) 225-283(7-10)

Material output (cc/min) 200

Max. Pattern width(mm) 360

Min. Air-Compressor(HP) 2

Weight of gun with cup (gms) 750
IMPORTANT: To ensure that this equipment reaches you in perfect condition, protective coatings, rust inhibitors, etc. have been used. Flush all equipment through with a suitable solvent before use to remove these agents present in the material passages.

Attach the air supply line to the air inlet (28). An air transformer installed as close as possible to the gun will provide filtered and regulated air
SOLVENTS OR COATING MATERIALS CONTAINING HALOGENATED HYDROCARBONS WITH THIS EQUIPMENT.

Static electricity is generated by fluid moving through pipes and hoses. Astatic spark, capable of igniting certain solvents and coating materials could be produced by high fluid flow rates. To prevent the risk of fire or explosion, earth continuity to the spray equipment and object being sprayed should be maintained.

Fault	Cause	Remedy
Not Sparing	No Pressure at the gun. Needle Adjustment Screw not properly adjusted.	Check Ari Supply. Adjust
Uneven Spray	Material Build up on air Cap/Nozzle Coating material flow or viscosity incorrect.	Clean air cap/nozzle Adjusted needle/screw or reduce viscosity
Intermittent Spray	Insufficient material in cup Gun material passage blocked Loose or damaged nozzle Needle sealing Damage.	Fill Cup Clean Tighten or Replace Replace
Fluid leakage from Packing nut	Needle Packing Damaged	Replace packing.
Dripping from the Nozzle	Damaged Nozzle or needle Foreign substances between fluid tip and needle prevent sealing	Replace Clean needle and nozzle in thinner or replace

ROCKFORT Trading

- Best Tools from INDIA -

SPRAY GUN P80

KEY FEATURES

AREAS OF APPLICATION

TECHNICAL DETAILS

INSTALLATION

DO NOT USE

SERVICE CHECK TROUBLESHOOTING