top of page
  • Drill Sleeves are used to adapt smaller morse taper shank tools to larger machine spindles.
  • The cocentricity and taper angles are precisely controlled which allows perfect locking and concentric movement to the tool held. These are available in two types:
  • A Grade - (Hardened and Ground).
  • Manufactured from case hardened Hi Tensile steel (20 MnCr5/SAE8620), these are fully hardened and are ground on the inside and outside.
  • Workshop Grade.
  • Manufactured from carbon steel, these are ground on the outside and have a reamed finish on the inside.
  • Permanent marking of size on the tang ensures convenience in use.

DRILL SLEEVES

AED20.00Price
  • Name Code Order No.
    Drill Sleeve  2 - 1  DSW/2-1 08520
    Drill Sleeve  3 - 1 DSW/3-1 08521
    Drill Sleeve  3 - 2 DSW/3-2 08523
    Drill Sleeve  4 - 2 DSW/4-2 08524
    Drill Sleeve  4 - 3 DSW/4-3 08526
    Drill Sleeve  5 - 2 DSW/5-2 08525
    Drill Sleeve  5 - 3 DSW/5-3 08527
    Drill Sleeve  5 - 4 DSW/5-4 08529
    Drill Sleeve  6 - 4 DSW/6-4 08530
    Drill Sleeve  6 - 5 DSW/6-5 08531
    Drill Sleeve- A GRADE - MT / 6 - 5 DSA/6-5 08431
  • Name Code   MT Inside   MT Outside Overall Length
    Drill Sleeve  2 - 1  DSW/2-1 2 1 92 mm
    Drill Sleeve  3 - 1 DSW/3-1 3 1 99 mm
    Drill Sleeve  3 - 2 DSW/3-2 3 2 112 mm
    Drill Sleeve  4 - 2 DSW/4-2 4 2 124 mm
    Drill Sleeve  4 - 3 DSW/4-3 4 3 140 mm
    Drill Sleeve  5 - 2 DSW/5-2 5 2 156 mm
    Drill Sleeve  5 - 3 DSW/5-3 5 3 156 mm
    Drill Sleeve  5 - 4 DSW/5-4 5 4 171 mm
    Drill Sleeve  6 - 4 DSW/6-4 6 4 218 mm
    Drill Sleeve  6 - 5 DSW/6-5 6 5 218 mm
    Drill Sleeve- A GRADE - MT / 6 - 5 DSA/6-5 6 5 218 mm
bottom of page